Internal Thread Globe Valve

Internal threaded globe valve belongs to forced sealing valve, so when the valve closes, pressure mu…

Description：

A brief introduction:
J13W series Internal screw stop valve Sealed valves are mandatory, so the valve is closed, the valve must exert pressure to force the sealing surface does not leak. When the medium into the valve from the bottom of the valve, the operating force required to overcome the resistance, is the stem and the packing friction and pressure generated by the media thrust force than the valve off the valve opening force, so the diameter of the valve stem, otherwise it will bend the stem top of the fault. Threaded valve is open, the valve opening height, the nominal diameter of 25% ~ 30%, the flow has reached the maximum that the valve has reached the full open position. So the valve fully open position, the valve stroke should be determined.
Two, Internal screw stop valve The design and manufacturing standards:
1, design and manufacture: GB12233;
2, the length of the structure: GB12221;
3, thread size: GB/T15918.1-93;
4, inspection and test: GB/T13927;
Three, Internal screw stop valve The advantages of:
1, simple structure, manufacture and maintenance more convenient.
2, the working stroke is small, open and close a short time.
3, good sealing, the sealing surface between the friction force is small, longer life.
Four, Materials for main parts the material of main parts

Part name Part name	Stem, valve cover Stem, Bonnet	The valve stem, Stem, Disc	Packing Packing
J13W-16P	Chromium nickel stainless steel Cr, NI Stainless steel	Chromium nickel stainless steel Cr, NI Stainless steel	Flexible graphite, PTFE PTEF, Soft graphite
J13W-160, J13W-40	High quality carbon steel Hihg grade carbon steel	Chromium stainless steel Cr, Stainless steel	Flexible graphite, PTFE PTEF, Soft graphite

Five, Internal screw stop valve The main performance specifications Chief property and specifieation

Model Type	Nominal pressure (MPa) Nominal pressure	The test pressure (MPa) Test pressure			Working pressure (MPa) Working pressure	Working temperature (DEG C) Working temperature	Applicable medium Applicable mediun
Model Type	Nominal pressure (MPa) Nominal pressure	housing Shell	Seal (liquid) Seal	Seal (gas) Seal	Working pressure (MPa) Working pressure	Working temperature (DEG C) Working temperature	Applicable medium Applicable mediun
J13W-16	One point six	Two point four	One point seven six	Zero point six	One point six	P is less than 540 DEG C	Liquefied petroleum gas, water, steam, oil, acid and other Petroleun gas Water, Asic, Steam, Oil, etc.
J13W-40P	Four	Six	Four point four	Zero point six	Four	P is less than 540 DEG C
J13W-160	Sixteen	Twenty-four	Seventeen point six	Zero point six	Sixteen	C is less than 425 DEG C
J13W-320P	Thirty-two	Forty-eight	Thirty-five point two	Zero point six	Thirty-two	C is less than 425 DEG C

Six, the main external and connecting dimensions Main external and connecting dimensions (mm)

The nominal diameter of DN (mm) Nominal diameter	Pipe thread G Source ioint	The size of Dimensions					The weight (Kg) Weight
The nominal diameter of DN (mm) Nominal diameter	Pipe thread G Source ioint	D0	L	H	H1	D	The weight (Kg) Weight
Six	1/4	Sixty	Fifty-five	Ninety	One hundred	Four	Zero point six three
Ten	3/8	Sixty	Sixty	Ninety-two	One hundred and two	Five	Zero point six five
Fifteen	1/2	Sixty-five	Sixty-five	Ninety-seven	One hundred and seven	Six	Zero point eight
Twenty	3/4	Eighty	Eighty	One hundred and nine	One hundred and twenty-one	Eight	One point zero seven
Twenty-five	One	One hundred	Ninety	One hundred and twenty-two	One hundred and thirty-two	Ten	One point eight
Thirty-two	11/4	One hundred and forty	One hundred and twenty-eight	One hundred and eighty	One hundred and ninety-one	Fifteen	Five
Forty	11/2	One hundred and sixty	One hundred and forty-eight	Two hundred	Two hundred and fifteen	Eighteen	Seven point two

Seven, design of ordering and selection of notes:
1, the product name and model of the products of the nominal diameter of pressure material by the use of the medium temperature and products with the attachment so that we provide you the correct selection.
2, if you have special request, please specify when ordering products in.
3, if the unit has been selected by the design model, please press the model directly to our sales department order.
4, the occasion is very important when using more complex or the environment when you try to provide design drawings.
Eight, customer service service commitment:
1, our valve products have quality problems within twelve months, responsible for free maintenance.
2, the warranty period if the products of our company have any quality problems, our company is responsible for free repair or replacement.
3, the warranty period if the user use undeserved, cause damage to the product, our company is responsible for the maintenance, collect the damaged parts cost.
4, after the warranty period of product quality problems, our company is responsible for the maintenance, collect the damaged parts cost.
5, if the user needs to our service, our company in the province of the user service personnel arrived at the scene within 12 hours, arrived at the scene 48 hours outside users.

Browse：

On A：External Thread Globe Valve

Next：Flange Angle Globe Valve

Internal Thread Globe Valve

分亯(xiang)到：